Conveyor Idler Roller Bearing

Model No. : 6204 TNGH

We are designer & manufacturers of bulk material handling conveyor spare parts. Conveyor systems such as belt conveyors move immense amounts of material across large distances every day, making them indispensable in mining. The primary option...

 Click for details

Model No. : 6204

Conveyor Roll Bearing is deep groove ball bearing used in belt conveyor idler rolls. Include open type deep groove ball bearing, nylon cage bearing, rubber or iron sealed bearing. Sealed Nylon cage bearing is one type of deep groove ball bearing...

 Click for details

Model No. : 6310

Conveyor idler roller is crucial spare parts of belt conveyor, and the important parts is bearings. Rubber sealed and iron shielded deep groove ball bearings are commonly adopted. There are numerous types of bearings which have been developed for...

 Click for details

Model No. : 6310

Deep groove ball bearing for bulk material handling conveyor is a special deep groove ball bearing which does not seize even when relatively large amounts of contaminant have entered the bearing, thick outer ring to reduce distortion due to unround...

 Click for details

Model No. : 6309 2RS

Conveyor idler roller is a important spare parts of Belt Mining System, and bearing is the most important parts of conveyor idler roller. Bearing for mining conveyor usually can not use common bearing. large internal clearance and unique...

 Click for details

Model No. : 6308 C4

Bearings In Mining Conveyor include ball bearing for conveyor idler, self-aligning ball bearing and Spherical roller bearing for conveyor drum pulley. Usually use large clearance C3/C4. XKTE's special internal design reinforced rings and cage to...

 Click for details

Model No. : 6305ZZ

As far as conveyors are concerned, bearings are used in idlers, reducers, motors and on pulley shafts. Bearing Used in Idler Roller is commonly deep groove ball bearing, and it is the important spare parts of idler roller. Iron dust shields protect...

 Click for details

Model No. : 6307

Standard deep groove ball bearing used in idler rollers revealed some problems, they will be clogged with debris to the point where they could no longer rotate; and high friction could also develop, may be causing over-heating and the possible risk...

 Click for details

Model No. : 6204

In hostile environments, such as mines and quarries, bulk material handling conveyor, even the most sophisticated and expensive deep groove ball bearings have consistently failed , resulting in bearing seizure. XKTE specialize in designing and...

 Click for details

Model No. : 6205

For conveyor idlers the selection of bearing type and size depends apart from cost on service life, such as influenced by load, speed, lubrication, misalignment and contamination. It features a special cage design and raceway control so that it will...

 Click for details

Model No. : 6306

Single deep groove ball bearings are generally chosen for the conveyor idlers because they are simple in design and normally require little attention in service. They are also capable of carrying considerable axial loads in either direction, as well...

 Click for details

Model No. : 6305

Investigations into the standard deep groove ball bearing used in idler rollers revealed a tendency for them to become clogged with debris to the point where they could no longer rotate; High friction could also develop, causing over-heating and the...

 Click for details

Model No. : 6306 2RS

Conveyor Idler is the important parts of bulk material belt conveyor, while bearing is the most important accessories of idler roller. XKTE is specialize in producing conveying machinery bearing, ball bearing for idler roller and spherical roller...

 Click for details

Because of the huge quantity of conveyor idlers in operation, bearing selection should not be done on basic rating life alone. Factors such as seal efficiency, grease life anti and seizeing performance etc. Our XKTE Rubber Sealed Bearing 6305 2RS...

 Click for details

Model No. : 80205

Idler roller is the important parts of Belt Roller Conveyor System, while bearing is the most parts of idler roller. Bearing 80205 C3 is old model of deep groove ball .bearing 6205 ZZ, We XKTE specialize in producing deep groove ball bearing for...

 Click for details

Model No. : 180310

Common bulk goods such as building materials, cement, gravel, ore or granules are usually conveyor with belt conveyor. the most important parts of conveyor is idler, and deep groove ball bearing is the most important part as conveyor roller...

 Click for details

Model No. : 180309

Bearing 180309 C3 is old models of deep groove ball bearing 6309-2RS, Bearing is the most important parts of conveyor idler roller components, while bearing for mining bulk material handling conveyor can not use common bearing. It usually adopt...

 Click for details

Model No. : 180308

Bearing 180308 is old models of deep groove ball bearing 6308-2RS. Conveyor idler bearing, which is an essential part of belt conveyor. It usually use rubber sealed or iron shielded type deep groove ball bearing. Our XKTE design and produce unique...

 Click for details

Model No. : 180307

Supporting Idlers are the most common Belt Conveyor Accessories. They support the belt and convey bulk materials. In coal mining, quarrying cement sector, you need exactly the right idler to safeguard the material flow. Our XKTE usually adopt...

 Click for details

Model No. : 180306

Ball Bearing 180306 is old model of deep groove ball bearing 6306-2RS, Conveyor Idlers are the most important part of conveyor components, while the most important part of idlers are bearings. In harsh dusty noise and vibration environments. Usually...

 Click for details