Conveyor Drum Pulley Bearing

Model No. : 22230

For heavily loaded conveyor systems, A wide variety of bearing assemblies may be used but in general, the rotating speeds are moderate and this combined with mounting on flexing steel structures, means that the normal solution is the self-aligning...

 Click for details

Model No. : 22228

Spherical roller bearings generally provide the best solution for material handling applications. These bearings have very high carrying capacities and can take up both radial and axial forces. They are easy to handle when mounting and dismounting...

 Click for details

Model No. : 22226

Rolling bearings are an essential part of bulk conveyors supporting both the idlers and the pulleys. To support conveyor pulleys, spherical roller bearings are most commonly used, because of their insensitivity to misalignment and high load...

 Click for details

Model No. : 22224

There are numerous types of bearings which have been developed for specific purposes and designed to operate in different operating environment. To support pulleys, spherical roller bearings (SRB) are most commonly used due to their insensitivity to...

 Click for details

Model No. : 22219

For very low speed applications, such as conveyor pulley. A wide variety of bearing assemblies may be used but in general, the rotating speeds are moderate and this combined with mounting on flexing steel structures, means that the normal solution...

 Click for details

Model No. : 22222

Snub Pulley is a conveyor Spare parts, provided to increase or decrease, warp or contact angle of belt on nearby pulley. Bearings used for conveyor pulleys are generally spherical roller bearings, they are usually located at the end of the conveyor...

 Click for details

Model No. : 22311

Spherical Roller Bearing 22311 E/CA, which have two rows of barrel shaped rollers and held in a brass cage without fixed middle block. Bearings used for conveyor pulleys generally use spherical roller bearings, XKTE Specialize in producing deep...

 Click for details

Model No. : 22310

Roller Bearing 22310 is spherical Roller Bearing used in bulk conveyor pulley. 22300 Series Spherical Roller Bearing are widely used in heavy load environment. mining machinery, Abrasive coal, metals and cements. Dusty grains, starches and wood...

 Click for details

Model No. : Pulley Components

Bearings for conveyor durm pulleys are generally spherical roller bearings, they are the most important spare parts of pulleys. XKTE specialize in producing bearing for conveyor idler roller and drum pulley, with good anti seizing performance, are...

 Click for details

Model No. : Head And Tail Pulleys

Drive or Head Pulley is used for the purpose of driving belt. Typically mounted in external bearings and driven by an external drive source. Return or Tail Pulley is used for the purpose of redirecting a conveyor belt back to the drive pulley....

 Click for details

Model No. : 22200 22300 Series

A conveyor pulley used for the purpose of redirecting a conveyor belt back to the drive pulley. Tail pulleys commonly serve the purpose of a Take-Up pulley on conveyors of shorter lengths. Bearings used for conveyor pulleys are generally spherical...

 Click for details

Model No. : Bearing 22211 CA

Conveyor Drum Pulley Bearing 22211 Spherical roller bearing used for belt conveyor, it has two rows type brass cage roller bearing. and is self-aligning type and mainly bear radial load. Our factory Specialized in producing deep groove ball bearing...

 Click for details

Model No. : 22240

In mining, whether underground or open cast, in gravel pits – in short, when extracting minerals of all types – a robust and intelligent conveyor system is one of the key components for trouble free distribution of the bulk materials that have been...

 Click for details

Model No. : 2212

Self-Aligning Ball Bearings are ideal when the alignment of the shaft and housing is problematic and the shaft may bend. The outer ring has a spherical raceway with its center of curvature coinciding with the bearing. This allows the axis of the...

 Click for details

Model No. : 2211

These bearings stay cool while functioning as they consist two rows of balls which lower the friction on the common raceway in the outer ring that helps reduce the heat. These types are ball bearings when the alignment of the shaft and the housing...

 Click for details

Model No. : 2210

Double Row Self-aligning Ball Bearing 2210 is recommended when the alignment of the shaft and bearing end cup (housing) is difficult or when the shaft may bend during operation. The concave raceway of the outer ring in combination with two rows of...

 Click for details

Model No. : Self aligning Ball Bearing 1311

Double Row Self aligning Ball Bearing 1311 is recommended when the alignment of the shaft and bearing end cup (housing) is difficult or when the shaft may bend during operation. This allows the axis of the inner ring, balls and cage to deflect...

 Click for details

Model No. : 1309

Double Row Self aligning Ball Bearing 1309 is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. The misalignment and/or shaft bending amount should be considered when specifying bearing...

 Click for details

Model No. : Self aligning Ball Bearing 1308

Double Row Self aligning Ball Bearing 1308 is recommended when alignment of the shaft and bearing housing is difficult and the shaft may flex. They have a sphere raceway in the outer ring and a double raceway in the inner ring. This feature give the...

 Click for details